诚信指数 0
一站通留言 客户留言 联系我们 联系我们 收藏此网站 发送消息 MSN交流
网站首页
北升简介
产品展示
企业新闻
技术文档
典型客户
招兵买马
留言咨询
联系我们
search 搜索网站中其它产品:
上海空压机厂
您现在的位置:上海北升实业发展有限公司 > 产品展示
 
550KW直联微油螺杆空压机-直联式螺杆空压机-上海螺杆空压机厂

产品型号: 550KW直联微油螺杆空压机-直联式螺杆空压机-上海螺杆
有 效 期: 长期有效
所 在 地: 上海市
配送信息:
供应数量:不限
了解详情,请立即咨询!
 

   
      7  8  9  10  11  12  13  14  15  16  
该公司共有 23条同类“直联螺杆空压机”信息       查看全部>>
详细说明

550KW直联微油螺杆空压机-直联式螺杆空压机-上海螺杆空压机厂

点击浏览下一页    

●型号:BS-750SAL ●流量:102m3/min●压力:0.7mpa
●型号:BS-750SAL ●流量:94.0m3/min●压力:0.8mpa
●型号:BS-750SAL ●流量::76.0m3/min●压力:1.0mpa
●型号:BS-750SAL ●流量:33.0m3/min●压力:1.25mpa
●联轴器连接:偏心允许范围大,可灵活应用于各种传动系统。拆装迅速,具有很高的装配性。无需润滑,无噪音,磨损。无滑动、摩擦、转动部件,可降低能量损失。结构简单,重量轻。不需维护。良好的环境适应性,可高温下运转。传动精度高。可靠性高,寿命长。
●Shaft coupling: eccentric allow range can be flexibly applied in all kinds of transmission system. Disassembling quickly, has the very high assembling. No lubrication, noiseless and wear. No sliding, friction, rotating components, can reduce the energy loss. Simple structure, light weight. Do not need to maintain. Good environment, can be running under high temperature adaptability. High driving accuracy. High reliability, long life.

BSTAIR(北斯特)空压机性能特点BSTAIR air compressor performance characteristics: 

●BSTAIR(北斯特)空压机具有节能、环保、投入成本低、维护费用低、高效率、高品质、低噪音、低振动、易操作、易维护、长寿命、全自动智能控制之特点;BSTAIR  air compressor machine has energy saving, environmental protection, low cost, lower maintenance cost, high efficiency, high quality, low noise and low vibration, easy operation, easy maintenance and long service life, automatic intelligent control characteristic;

 

●机组采用PLC控制,全中文显示,显示所有状态信息、故障报警信息、参数设定、温度及压力、总运行时间及加载运行时间、加载/卸载/满载显示、紧急停机、操作模式等。并能记录最少30条历史报警信息,排气压力、排气温度历史信息,具备自动和手动控制 (自动加载和卸载)实现机组无人化运行。

排气量可根据用气量情况自动调节(满载/空载和比例调节相结合方式0~100%)。

具备的保护功能:

⑴ 排气温度过高保护,机头排气温度超过105℃,立即报警及停机。

⑵ 电器保护,电器故障报警及停机。

⑶ 过载保护、主电机(/风扇电机过载报警及停机。

⑷ 380V电源错相保护、缺相保护停机。

⑸ 超压保护,排气压力超过设定值报警停机。

⑹ 具备油气分离器阻塞报警、空气过滤阻塞报警、油过滤器阻塞报警三种报警功能。

⑺ 自动温控系统,通过温控阀维持润滑油温度高于压力露点温度以上,保证油温在状态。

⑻ 故障报警装置,机组出现故障能及时提示用户更换部件并做必要维护。

⑼ 机组具有自我诊断及保护功能。

机组PLC控制系统配有RS485串行接口,输入用户DCS系统,可对多台机组远程控制监控。

Unit took PLC control, all Chinese show, show that all status information, fault alarm information, set parameters, temperature and pressure, total operation time and loading operation time, loading/unloading/carrying display, emergency stop, operating modes, etc. And records at least 30 of alarm information, history exhaust pressure, exhaust temperature history information, with automatic and manual control (automatic loading and unloading) to realize the unmanned operation.

Displacement can automatically adjust according to YongQiLiang situation (carrying/load and proportion combined adjustment way 0 ~ 100%).

Have the protection function:

(1) the exhaust temperature is too high to protect, the nose exhaust temperature over 105 ℃, and stop immediately report to the police.

(2) electrical protection, electrical fault alarm and stop.

(3) overload protection, the main motor (/ fan motor overloaded alarm and stop.

(4) 380 V power supply wrong phase protection, phase lack protection stop.

(5) overpressure protection, exhaust pressure value alarm stop. More than

(6)have oil and gas separator jam alarm, air filter blocking alarm, oil filter blocking alarm three alarm function.

(7)Meantime, automatic temperature control system by temperature control valves maintain oil temperature higher than pressure temperature above the dew point, to ensure the oil temperature in the best state.

(8)The alarming device, unit stuff failure in time to prompt the user to change and make any necessary components maintenance.

(9)unit has self diagnosis and protection function.

The PLC control system equipped with RS485 serial interface, input user DCS system, can be used for units of remote control monitoring.

点击浏览下一页

●高效、可靠的原装进口顶尖螺杆主机,作为当今国际品牌之第三代产品,具有的非对称 5:6 齿形转子、性能卓著,加工精度易于保证,压缩效率高,高效率优势远优于其它同类品牌,以其精良独特的设计,精密的制造为全世界所肯定,并久经市场的考验;

●Had more efficient and reliable, the original import top screw host, as the international most advanced brands of third generation product, has covered the asymmetric tooth shape rotor, outstanding performance, easy assurance machining accuracy, high efficiency, high efficiency advantage compression is far better than other similar brand, with its unique design, excellent precision manufacturing for the world affirmation, and experienced and the test of the market;

点击浏览下一页

●主机排气端采用成对的圆锥滚柱轴承,通过线接触承受均布载荷,极大地延长了主机的寿命;

●The host had exhaust the pairs of tapered roller bearings, through the line contact uniformly distributed, greatly extend the life;

●主机进口 SKF 或 FAG 轴承处设计的冷却剂贮槽,避免了启动瞬间的干摩擦,进一步延长了轴承的寿命;

●Host had imported SKF or FAG bearing the place design coolant storage tank, to avoid the start of dry friction moment, further extended the bearing life;

点击浏览下一页

●主机轴伸处设计了带回油孔的轴封,防止了润滑油的渗漏;

●Host shaft had stretched place design of the oil hole back to the shaft sealing, prevent the leakage of oil;

●高环境温度设计-北斯特空气压缩机以46℃的高环境温度作为设计条件(水冷机组最高进水温度也可达35℃)。高效富裕的换热器,避免了在炎热的夏天由于高温而停机的现象;

●High temperature environment miscalculates design-north, air compressor, with 46 ℃ high temperature environment as design conditions (water cooling unit inlet water temperature also can reach the highest 35 ℃). Efficient heat exchanger, avoid the rich in the heat of the summer due to high temperature and stop phenomenon;


●瑞典ABB电气控制系统,全智能控制系统,中英文液晶显示屏幕,具有自我诊断及保护装置;可远程控制和多台主机连锁控制,实现无人看管、高科技操作;

●vice Sweden ABB electric control system, intelligent control system, the liquid crystal display screen, with Chinese and English self diagnosis and protection device; Remote control and multiple hosts chain control to realize unattended, high-tech operation;


●智能气量自动控制,空车过久自动停机、自动开机确保节能在 25% 以上; ●Intelligent automatic control, took the gas car is too long, automatic stop automatic startup to ensure energy saving in the above 25%;


●Y 系列三相四极异步电动机,压缩机专用电机,进口 SKF 或 FAG 轴承,绝缘等级 F 级,根据用户要求也可提供IP54及高压电机。特别适合长时间使用,安全可靠;

●vice Y series three-phase asynchronous motor, compressor four very special motor, import SKF or FAG bearing, insulation class F grade, according to user requirements could also provide IP54 and high voltage motor. Especially suitable for long time use, safe and reliable;
 

●原装高质量油过滤器、油气分离滤芯,三重分离,确保含油量 <3ppm ;主管路采用金属管,长期运行安全不泄漏、不变形;原装进口德国 V 型传动皮带,使用寿命 >10000 小时;

●Had the original high quality oil filter, oil and gas separation filter, triple separation, to ensure that oil content < 3 PPM; The competent road tube, long-term safety operation not leak, deformation; The original import Germany V type transmission belt, service life > 10000 hours;

点击浏览下一页

●油路系统无阀设计,整机运转更可靠、更安全;原装进口压缩机专用油,大大减少压缩机的内外泄漏、提高主机效能和寿命;

●Oil system had no valve design, the operation is more reliable and more security; The original import compressor for oil, greatly reducing the compressor internal and external leakage, improve the performance and life; host


●整机油路、气路、电控均采用进口原装配件,性能稳定、质量保障,适应任何恶劣工况运行;

●Had the machine, pneumatic, hydraulic system control are imported original accessories, stable performance, quality guarantee, adapt to any bad operation;


●为了达到更好的散热效果,北升设计师们除了采用更大面积的换热器,还使用了时下只有高端机型才会配置的离心式风机(可选)。离心式风冷却技术是目前世界先进的技术之一,在相同风机功率的情况下,离心式风机能产生更多的风量,更高的散热效率和更低的噪音,换热器采用低温差设计、大面积、分体式结构,预留了充分的散热余量,同时也更便于维护拆装保养。更适合于高温、高湿度的工作环境;

●In order to achieve better had come loose hot effect, north rose designers besides using larger areas of heat exchanger, also have used nowadays only high-end models will be the configuration of the centrifugal fan (optional). Centrifugal wind cooling technology is one of the world's advanced technology, in the same fan power, centrifugal fan can produce more air volume, higher heat efficiency and lower noise, heat exchanger low temperature difference design, large area, fission type structure, obligate sufficient heat dissipation surplus, at the same time also more easy to maintain disassembling maintenance. The more suitable for high temperature and high humidity working environment;

点击浏览下一页


●整体底盘密封设计、极大延长空气滤清器、油过滤器、油细分离器的使用寿命;整机箱体可自动拆卸; The whole chassis seal design, had greatly extend the air filter, oil filter, oil and the service life of the separator; The box can be automatically remove;

点击浏览下一页

●为了达到更好的散热效果,水冷式空压机采用了高效的水冷却器。其特点:
1、传热面积广:本冷却器的传热管采用裸管的设计,其接触面积广,传热确实,冷却效果佳。
2、良好的传热管:采用导热性良好的99.9%纯铜,为最适合散热的冷却管。
3、不漏油:因板管与本体采用一体化设计,可以避免水与油及空气混合的困扰,同时在出厂前经过气密测试确实紧密,故能达到防漏的目的
   换热器采用低温差设计、大面积、分体式结构,预留了充分的散热余量,同时也更便于维护拆装保养。更适合于高温、高湿度的工作环境体底盘密封设计、极大延长空气滤清器、油过滤器、油细分离器的使用寿命;整机箱体可自动拆卸;

In order to achieve better cooling, water-cooled air compressor machine adopts the high efficient water cooler. Its features:
1, heat transfer area wide: the cooler the pipe of the bare tube design, and its contact area wide, heat transfer really operation and good cooling effect.
2, good the pipe: the thermal conductivity of 99.9% pure copper, good for the most suitable for the cooling tube heat.
3, not because of the oil leak: the ontology and the board integration design, can avoid water and oil and air mix about, at the same time, before delivery after air testing, so closely indeed to prevent leakage of purpose
Heat exchanger low temperature difference design, large area, fission type structure, obligate sufficient heat dissipation surplus, at the same time also more easy to maintain disassembling maintenance. The more suitable for high temperature and high humidity working environment.


●机组为全罩箱式,机组内含螺杆主机、电机、排气系统、喷油及油气分离系统、冷却系统、气水分离器、控制系统和电气系统于一体。无需专门的基础,搬运、安装极其方便;For all the cover box had unit, unit contains screw host, motor, exhaust systems, oil injection and oil and gas separation system, cooling system, gas water separator, control system and the electrical system in a body. No special foundation, carry, installation is convenient;


●低噪声 BSTAIR(北斯特)螺杆空压机都有标准配置的机罩确保机组工作时的噪声更低,这使得在考虑安置空压机时,有更大的灵活性;BSTAIR had low noise screw air compressor has a standard machine to ensure the work unit cover less noise, the turn for air compressor unit, consider more flexibility;


●独特的气量调节方式 ,不仅满足您任何工况需求,而且使您更节能,0-100%自动加载/卸载,60-100%恒压气量调节,ACS智能型全自动调节;Had unique regulating mode, not only meet the gas you any working demands, and make you more energy-efficient, 0 to 100% to be automatic loading/unloading, 60-100% constant pressure volume adjustment, the ACS intelligent automatic regulation;


●高效的油气分离系统 – 高效的两级油气分离系统,使出口压缩空气的含油量仅3ppm,

 级采用机械分离,使大约95%的油经完整的分离系统被分离;

第二级过滤采用特制的多层玻璃纤维滤芯,使压缩空气品质更佳;

-vice efficient oil and gas separation system-efficient two levels of oil and gas separation system, make exports the oil content of the compressed air only 3 PPM,

The first level by mechanical separation, that about 95% of the oil from the complete separation system was separated;

The second filtering adopts specially made multiple layers of glass fiber filter, make the compressed air quality is better;

●与电机直联齿轮传动和皮带传动方式,采用了专为压缩机设计配置的电机,皮带传动采用德国进口皮带,配置自动张紧装置,周期长,传动效率高;通过齿轮直接驱动。这种坚固的结构提供了持久的对中和可靠的驱动。传动系的各个部件精密配合,给您最可靠、稳定并且简单的动力传送;With motor had direct coupling gear transmission and belt drive way, USES the specially designed for the design of motor, compressor configuration with German import conveyor belt transmission belt, configure automatic tension device, cycle is long, high transmission efficiency; Through the gear direct drive. This kind of solid structure provides lasting and reliable to drivers. The transmission of each parts with precision, giving you the most reliable, stable and simple power transmission;


●BSTAIR(北斯特)螺杆压缩机几点说明:

A .设计使用寿命大于20年。

B .主机采用三层密封,以保证主机头密封更可靠。

C .在主机排气端采用二只向心推力轴承,使得主机动转更平稳、更可靠。

D .所有与压缩空气接触的管道及容器表明均经过特殊处理。

E .空滤芯、油过滤器、油气分离器均采用原装进口以确保过滤精度。

F .排气量、排气压力以及相关性能在相关寿命内予以保证。

BSTAIR  screw compressor some explanation:

A.design service life more than 20 years.

B.host the use of three layers, in order to ensure that the host sealing head seal more reliable.

C.in the host with second only to the exhaust heart thrust bearing, make host regulated more smoothly and more reliable.

D.all and compressed air pipe and containers that contact all through the special treatment.

E.empty filter, oil filter, oil and gas separator all adopt imported to ensure filtering precision.

F.displacement, exhaust pressure and related performance in the related in life to be ensured.

点击浏览下一页

●BSTAIR(北斯特)空气压缩机的设备设计、制造和检验标准BSTAIR air compressor, the equipment design, manufacturing and inspection standards:


ISO1217Edition3  《性能验收标准》(国际标准)
 
GB/T4980-2003    《容积式压缩机噪声声功率级的测定—工程法》
 
GB/T15487-1995   《容积式压缩机流量测量方法》
 
GB/T13384-2008   《机电产品包装通用技术条件》
 
JB/T6430-2002    《一般用喷油螺杆式空气压缩机》
 
GB/T13277.1-2008 《压缩空气 部分 污染物净化等级》
 
GB150-98         《钢制压力容器》
 
GB10892-2005     《固定的空气压缩机安全规定和操作规程》
 
JB/T7663.1-2005  《容积式空压机包装技术条件》
 
JB/T6431-92      《容积式空压机用灰铸铁伯技术条件》
 
ISO-2151         《运转器噪音测试标准》(国际标准)
 
GB699—1999      《优质碳素结构钢技术条件》
 
GB711—2008      《优质碳素钢热轧厚钢板技术条件》
 
GB1225—76       《焊条检验、包装和标志》
 
JB/T74-84        《管法兰》技术要求
 


ISO1217Edition3:The performance of the international standard acceptance standard ()

GB/T4980-2003:The volumetric compressor noise sound power levels of determination of engineering law--

GB/T15487-1995:The volumetric flow measurement methods of compressor

GB/T13384-2008:The mechanical and electrical product packaging general technical conditions"

JB/T6430-2002:"Generally with the injection screw air compressor"

GB/T13277.1-2008:The first part of the compressed air pollutants purification level"

GB150-98:The steel pressure vessel"

GB10892-2005:The fixed air compressor safety regulations and operating rules

JB/T7663.1-2005:The volumetric air compressor packaging technology conditions of

JB/T6431-92:The volumetric air compressor technology conditions of grey cast iron "with

ISO 2151:The noise of the operation standard test (international standard)

GB699-1999:The high quality carbon steel technology conditions of

GB711-2008:The quality carbon steel rolling thick plate technology conditions of

GB1225-76:The electrode inspection, packing and marking"

JB/T74-84:The flange "technical requirements

技术参数图:

点击浏览下一页

推荐浏览
22KW直联式螺杆空压机报价_上海螺杆空压机厂家_22KW8公斤3.5立方螺杆空压机价格
22KW直联式螺杆空压机报价_上海螺杆空压机厂家_22KW8公斤3.5立方螺杆空压机价格
/台
油水分离器报价_空压机专用油水分离器_上海空压机厂家
油水分离器报价_空压机专用油水分离器_上海空压机厂家
/台
22KW组合式空压机报价_上海空气压缩机厂家_22KW8公斤3.5立方的空压机价格
22KW组合式空压机报价_上海空气压缩机厂家_22KW8公斤3.5立方的空压机价格
/台
400KW直联式螺杆空压机报价_上海螺杆式空压机厂家_400KW8公斤63立方的螺杆空压机价格
400KW直联式螺杆空压机报价_上海螺杆式空压机厂家_400KW8公斤63立方的螺杆空压机价格
/台
250KW直联微油螺杆空压机-直联式螺杆空压机-上海空压机厂家
250KW直联微油螺杆空压机-直联式螺杆空压机-上海空压机厂家

免责声明:本商铺所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,一比多公司对此不承担任何保证责任。

友情提醒:为保障您的利益,降低您的风险,建议优先选择商机宝付费会员的产品和服务。


上海北升实业发展有限公司   地址:上海市松江永强路68号20A   邮政编码:201601
联系人:黄先生   电话:021-57853070   手机:13361863070   传真:021-60852518
技术支持:一比多  |  免责声明 | 隐私声明
增值电信业务经营许可证:沪B2-20070060     网站Icp备案号:沪ICP备05000175号
<%---站点编号 ----%> <%---页面编号 ----%> <%---页面参数1 ----%> <%---页面参数2----%> <%---页面参数3 ----%>